Хорошо!: 
Плохо!: 
Теперь еще один вопрос, по этому же скрипту, как сделать так что бы чар отражался только в зеркале, а не на всей стене)
Показано с 71 по 80 из 1470
-
01.06.2009, 10:07 #71
-
01.06.2009, 15:08 #72
-
01.06.2009, 15:22 #73
Нет, что то другое(
-
01.06.2009, 16:00 #74Создатель
Я просто занет, а на словах я помог. Тож то сумел вспомнить. Будет время по смотрю.
-
29.08.2009, 17:03 #75
Какая часть скрипта отвечает за стрелочку 16х16 внизу мессаги?
Мне бы ее подвинуть вправо. (Мейкер XP)
-
30.08.2009, 22:31 #76
SlashBeast
Хех, это тебе править Window надо!
poccil его переписывал. К сожалению, чистого под рукой нет (нет времени искать), а вот немного подпорченный:
Спойлер Window:
Я там делал менябельным расстояние содержимого от рамки окна. И даже сделал. Вот только не помню - здесь или в другом скрипте. Если не в этом, то скорее всего он на половину испорчен и условно не работоспособен. Но ты проверь - вдруг случится чудо.
Что касается стрелки, то там их две. Одна - когда окно можно прокрутить, вторая - говорит, что нужно нажать кнопку. Если тебе последнюю, то вот (наверное):
Спойлер Стрелка:
А если другую - ищи сам. Она там, рядышком.
P.S. Если совсем припрет - пиши в приват, может, найдется минутка.
-
09.09.2009, 19:34 #77
не актуально
Последний раз редактировалось Demonic; 10.09.2009 в 19:36.
-
09.11.2009, 14:31 #78
Вот такой скрипт.Должен превращать графику мэйкера в нечто напоминающие 3d.Если кто то попробует и запустит пожалуйста рад буду услышать отзывы
А вот ссылка на то что должно получится http://brmaker.com.br/forum/script-M...-Xp-t2268.html
Сам скрипт
=begin
Mode07 on the Map!
Includes:
Mode07 v0.6
Overworld Sprite Resize
Written by mewsterus
Special Thanks:
Fanha Giang (for a reverse engineered Tilemap class)
--------------------------------------------------------------------------------
Instructions:
--------------------------------------------------------------------------------
To install, just insert this in a descriptive code slot right above Main.
This is different than previous instructions; please read the next paragraph.
If you had a previous install of this script and need an original version of
Spriteset_Map, one can be found at:
http://www.rpg-palace.com/scripts/spriteset_map.txt
To activate Mode07, add [#XX] to the map's name, replacing XX with the
percentage of Mode07 to apply. Greater numbers will result in a more slanted
world.
To activate overworld sprite resize, add [OV] to the map's name. This will make
sprites smaller on that map.
For the purposes of location scripts, these identifiers will not appear.
Examples:
"Overworld[#40]" will result in a slant identical to the second screenshot.
"Underworld[OV]" will resize only the player character to a small size, as if
seen from high above.
"Atthelevelworld[OV][#12]" will result in the player being resized, and a modest
slant of 12%
"JustPlainWorld" will result in the same old map you've always seen.
To add a sky, simply use the panorama with the tileset. Also, events will not
be drawn flat with the map. Any vertical objects such as trees should be put
in events and displayed that way.
You can also add a sky by adding a fog. If you add this, you can make it look
like the first screenshot.
A note on the $strip_size variable; the default value is 8, however there is
extremely minimal, almost nonexistant lag with 16. The screen is extremely
smooth with 4, or even 2. If you're having major problems with lag, you may
need to use 32, but it won't look too pretty.
--------------------------------------------------------------------------------
* Draw_Tilemap v1.72-0.6
Fanha Giang, 02/12/2006 (mm/dd/yyyy)
Edited for Mode07 by mewsterus 08/08/2006 (mm/dd/yyyy)
=end
#================================================= ==============================
$width = 640 # Screen width (will not change resolution,
$height = 480 # Screen height here for compatibility)
$ov_zoom = 0.6 # Overworld zoom multiplier
$strip_size = 8 # Size of each strip of the map. Higher numbers will lag less.
# Recommended that this number be a power of 2.
# Do not make higher than 64.
$curve = true # Whether the map is curled, for overworlds (old method)
$data_map = load_data("Data/MapInfos.rxdata")
#================================================= ==============================
class RPG::MapInfo
def name # Definition prevents location scripts from reading anything within
return @name.gsub(/\[.*\]/) {""} # brackets, including the brackets
end
#-----------------------------------------------------------------------------
def original_name
return @name
end
#-----------------------------------------------------------------------------
def overworld?
return @name.scan(/[OV]/).size > 0
end
#-----------------------------------------------------------------------------
def pitch
@name =~ /\[#[ ]*([00-99]+)\]/i
return $1
end
end
#================================================= ==============================
class Draw_Tilemap # This class controls a set of sprites, with different Z
# values, arranged into horizontal bars
attr_accessor :tileset
attr_accessor :map_data
attr_accessor
riorities
attr_accessor :autotiles
attr_accessor :bitmaps
attr_accessoritch
attr_accessor
x
attr_accessory
attr_accessorlus_y
INDEX = # Autotile definitions
[
26, 27, 32, 33, 4, 27, 32, 33, 26, 5, 32, 33, 4, 5, 32, 33,
26, 27, 32, 11, 4, 27, 32, 11, 26, 5, 32, 11, 4, 5, 32, 11,
26, 27, 10, 33, 4, 27, 10, 33, 26, 5, 10, 33, 4, 5, 10, 33,
26, 27, 10, 11, 4, 27, 10, 11, 26, 5, 10, 11, 4, 5, 10, 11,
24, 25, 30, 31, 24, 5, 30, 31, 24, 25, 30, 11, 24, 5, 30, 11,
14, 15, 20, 21, 14, 15, 20, 11, 14, 15, 10, 21, 14, 15, 10, 11,
28, 29, 34, 35, 28, 29, 10, 35, 4, 29, 34, 35, 4, 29, 10, 35,
38, 39, 44, 45, 4, 39, 44, 45, 38, 5, 44, 45, 4, 5, 44, 45,
24, 29, 30, 35, 14, 15, 44, 45, 12, 13, 18 ,19, 12, 13, 18, 11,
16, 17, 22, 23, 16, 17, 10, 23, 40, 41, 46, 47, 4, 41, 46, 47,
36, 37, 42, 43, 36, 5, 42, 43, 12, 17, 18, 23, 12, 13, 42, 43,
36, 41, 42, 47, 16, 17, 46, 47, 12, 17, 42, 47, 0, 1, 6, 7
]
X = [0, 1, 0, 1] # Used in 16x16 autotile drawing; left, right, left, right
Y = [0, 0, 1, 1] # Used in 16x16 autotile drawing; up, up, down, down
#-----------------------------------------------------------------------------
def initialize
# Get initial data from Game_Map
@tileset = RPG::Cache.tileset($game_map.tileset_name)
@map_data = $game_map.data
@priorities = $game_map.priorities
@autotiles = []
for i in 0..6
@autotiles[i] = RPG::Cache.autotile($game_map.autotile_names[i])
end
# Provide blank data in proper object form
@ox = 0
@oy = 0
# Bitmaps used for each priority's drawing. Priorities 2-5 are combined.
@bitmaps = [Bitmap.new($game_map.width*32, $game_map.height*32+$strip_size),
Bitmap.new($game_map.width*32, $game_map.height*32+$strip_size),
Bitmap.new($game_map.width*32, $game_map.height*32+$strip_size)]
# Generate blank sprites
@sprites = [[], [], []]
for i in 0..2 # For each layer
for j in 0..$game_map.height * (32 / $strip_size) - 1
# For each horizontal strip of $strip_size height, make a blank sprite
@sprites[i].push(Sprite.new)
@sprites[i][j].bitmap = Bitmap.new($game_map.width*32, $strip_size*2)
@sprites[i][j].x = $width / 2
@sprites[i][j].y = -64
@sprites[i][j].z = -5 + (i * 10)
end
end
@disposed = false
draw
end
#-----------------------------------------------------------------------------
def update
# Retrieve variable values for slant drawing; these values accesible by event
@pitch = $game_map.pitch.to_f
@plus_y = $game_map.plus_y
for i in 0..2 # For each layer
for j in [0, (($height / 2) - (($height * 60) /
@pitch) + @oy) / $strip_size].max.to_i..[@sprites[i].size - 1,
(@oy + $height) / $strip_size].min.to_i
# For each strip within the visible screen, update OX/Y
@sprites[i][j].x = $width / 2
@sprites[i][j].y = j * $strip_size - @oy
unless @pitch == 0 # Apply X Zoom
@sprites[i][j].zoom_x = (@sprites[i][j].y - $height / 2) *
(@pitch / ($height * 25)) + 1
if $curve # Zoom Y values same as X, and compensate
@sprites[i][j].zoom_y = @sprites[i][j].zoom_x
@sprites[i][j].y += $strip_size * (1 - @sprites[i][j].zoom_y) *
((1 - @sprites[i][j].zoom_y) /
(2 * ((@pitch / 100) /
($height / ($strip_size * 2)))) + 0.5)
end
end
@sprites[i][j].ox = @ox + $width / 2
# Add plus_y value; used in airship script
@sprites[i][j].y += @plus_y
end
end
end
#-----------------------------------------------------------------------------
def dispose
# Dispose all sprites
for i in 0..2
for j in @sprites[i]
j.bitmap.dispose
j.dispose
end
end
for i in @bitmaps
i.dispose
end
@tileset.dispose
for i in 0..6
@autotiles[i].dispose
end
@disposed = true
end
#-----------------------------------------------------------------------------
def disposed?
return @disposed
end
#-----------------------------------------------------------------------------
def draw
# Draw each individual position by XY value
for x in 0...@map_data.xsize
for y in 0...@map_data.ysize
draw_position(x, y)
end
end
for i in 0..2 # For each priority
for j in 0..@sprites[i].size - 1
# For each horizontal strip, transfer the bitmap appropriately
@sprites[i][j].bitmap.blt(0, 0, @bitmaps[i],
Rect.new(0, j * $strip_size, $game_map.width * 32, $strip_size * 2))
end
end
end
#-----------------------------------------------------------------------------
def draw_position(x, y)
for layer in 0..2
pos = @map_data[x, y, layer]
@priorities[pos] = 2 if @priorities[pos] > 2 # Round priorities down to 2
if pos >= 384 # If it is a tile
# src_rect = 32x32 Rect on the tileset for source bitmap
src_rect = Rect.new(((pos-384)%8)*32, ((pos-384)/8)*32, 32, 32)
# Transfer source bitmap on the tileset to the current map tile
@bitmaps[@priorities[pos]].blt(x * 32, y * 32, @tileset, src_rect)
elsif pos >= 48 and pos < 384 # If it is an autotile
id = pos / 48 - 1 # Which autotile is used (0-6)
# plus_x is in development for animated autotiles
plus_x = 0 #((@anim / 4) % (@autotiles[id].width / 96)) * 96
for corner in 0..3
h = 4 * (pos % 48) + corner # Used to access INDEX
# src_rect = 16x16 Rect on the autotile for source bitmap
src_rect = Rect.new((INDEX[h]%6)*16+plus_x, (INDEX[h]/6)*16, 16, 16)
# Transfer source bitmap on the autotile to the current 16x16 tile
@bitmaps[@priorities[pos]].blt(x*32+X[corner]*16, y*32+Y[corner]*16,
@autotiles[id], src_rect)
end
end
end
end
end
#================================================= ==============================
class Game_Map
attr_accessoritch
attr_accessorlus_y
#-----------------------------------------------------------------------------
alias setup_or :setup
def setup(map_id)
setup_or(map_id)
@pitch = $data_map[$game_map.map_id].pitch
@plus_y = 0
end
#-----------------------------------------------------------------------------
def name
return $data_map[@map_id].name
end
end
#================================================= ==============================
class Sprite_Character < RPG::Sprite
attr_accessor :character
#-----------------------------------------------------------------------------
def initialize(character = nil)
super()
@character = character
update
end
#-----------------------------------------------------------------------------
alias update_or :update
def update
update_or
# Update pitch value, and update zoom values to match
@pitch = $data_map[$game_map.map_id].pitch.to_f
self.zoom_x =
self.zoom_y = ((@character.screen_y - 16) - ($height / 2)) *
(@pitch / ($height * 25)) + 1
# Set sprite coordinates. X value is multiplied by zoom value from the center
self.x = ($width / 2) + ((@character.screen_x - ($width / 2)) * self.zoom_x)
self.y = @character.screen_y
# Add Y value for zoom compensation while in curve mode
if $curve and @pitch != 0
self.y += (8 * (1 - self.zoom_y) * ((1 - self.zoom_y) /
(2 * ((@pitch / 100) / ($height / 16.0))) + 0.5))
end
# Add plus_y value; used in airship script
self.y += $game_map.plus_y unless @character.is_a?(Game_Player)
self.z = @character.screen_z(@ch) - (self.zoom_y < 0.5 ? 1000 : 0)
if $data_map[$game_map.map_id].overworld? and
@character.is_a?(Game_Player) # Multiply zoom by Overworld factor if
self.zoom_x *= $ov_zoom # the map is marked with [OV] and event
self.zoom_y *= $ov_zoom # is a Game_Player
end
end
end
#================================================= ==============================
class Spriteset_Map
def initialize
# Make viewports
@viewport1 = Viewport.new(0, 0, 640, 480)
@viewport2 = Viewport.new(0, 0, 640, 480)
@viewport3 = Viewport.new(0, 0, 640, 480)
@viewport2.z = 2000
@viewport3.z = 5000
# Make tilemap
@tilemap = Draw_Tilemap.new
# Make panorama plane
@panorama = Plane.new
@panorama.z = -2000
# Make fog plane
@fog = Plane.new
@fog.z = 3000
# Make character sprites
@character_sprites = []
for i in $game_map.events.keys.sort
sprite = Sprite_Character.new($game_map.events[i])
@character_sprites.push(sprite)
end
@character_sprites.push(Sprite_Character.new($game _player))
# Make weather
@weather = RPG::Weather.new(@viewport1)
# Make picture sprites
@picture_sprites = []
for i in 1..50
@picture_sprites.push(Sprite_Picture.new(@viewport 2,
$game_screen.pictures[i]))
end
# Make timer sprite
@timer_sprite = Sprite_Timer.new
# Frame update
update
end
#-----------------------------------------------------------------------------
def dispose
# Dispose of tilemap
@tilemap.dispose
# Dispose of panorama plane
@panorama.dispose
# Dispose of fog plane
@fog.dispose
# Dispose of character sprites
for sprite in @character_sprites
sprite.dispose
end
# Dispose of weather
@weather.dispose
# Dispose of picture sprites
for sprite in @picture_sprites
sprite.dispose
end
# Dispose of timer sprite
@timer_sprite.dispose
# Dispose of viewports
@viewport1.dispose
@viewport2.dispose
@viewport3.dispose
end
end
-
09.11.2009, 16:14 #79
Гм.. А можно демо?
-
09.11.2009, 17:14 #80
С удовольствием бы выложил демо но у меня не получилось.Поэтому и обращаюсь сюда.Может у кого то получится
Ответить с цитированием
Сообщение от Реймон
Социальные закладки